Print Page | Close Window

alternate place to connect amp power wire

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117288
Printed Date: May 03, 2024 at 9:46 PM


Topic: alternate place to connect amp power wire

Posted By: kaztheminotaur
Subject: alternate place to connect amp power wire
Date Posted: October 27, 2009 at 12:41 PM

I have a 99 Silverado with the side terminal battery.  I am not able to connect the amp power wire at the + terminal because of the plastic lip and end of the + wire.

I have a small junction box that the battery wire goes into.  The alternator wire connects there and thenit goes down to the starter.  There is a nice stud / plate that they connect to.  Could I connect my amp power wire there?

Any issues with grounding to the seat mounting bolt?




Replies:

Posted By: DYohn
Date Posted: October 27, 2009 at 12:45 PM

Yes, you can use the terminal block, and no, don't use the seat bolt (or the seatbelt bolt) for grounding.  Drill and sand a proper ground into the chassis of the vehicle.



-------------
Support the12volt.com




Posted By: raydawg357
Date Posted: October 29, 2009 at 3:18 PM
You can also purchase battery terminal bolts that are specially designed for side mount batteries for under $10. 

-------------
Do it right the first time




Posted By: necessaryevil
Date Posted: October 29, 2009 at 8:51 PM
i upgraded the bat+ - alt wire on my '93olds cutlass, and it ran into the starter, so i just ran my amp wire off of the starter post

-------------
time is not wasted when you are wasted all the time





Print Page | Close Window