Print Page | Close Window

sub frequency setting

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117481
Printed Date: May 17, 2024 at 6:14 PM


Topic: sub frequency setting

Posted By: lockster0191
Subject: sub frequency setting
Date Posted: November 05, 2009 at 4:31 AM

hi all first thread

problem i have is kenwood 10in sub in port box, i understand how to set gain but no idea what freq setting.

alpine cde 9802rb head unit no idea which freq to set this on, i have a set of pioneer 5.25 components up front freq range 35-32.000

any help to blend these together

thanks



-------------
locky



Replies:

Posted By: i am an idiot
Date Posted: November 05, 2009 at 6:55 AM

You will have to experiment with the control to see what sounds best to you.  Personally I do not like anything above 70 Hz. coming from my sub. 




Posted By: DYohn
Date Posted: November 05, 2009 at 10:17 AM
It's a matter of taste and how well you can integrate with your system, but I always recommend for a daily driver starting with the LP crossover set to about 100-120Hz, then work down from there to discover the "sweet spot" that gives you the sound you want.

-------------
Support the12volt.com



Posted By: lockster0191
Date Posted: November 05, 2009 at 2:11 PM

hey guys thanks for reply

does any of you guys know how to set alpine hu, i think bass freq is between 60-80-100-200hz, then bass engine, then beetween wide and narrow

treble settings are between 10-12.5-15-17.5khz unsure how all of these should be set

cheers



-------------
locky




Print Page | Close Window