clueless on box size

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117486
Printed Date: May 10, 2025 at 10:28 AM

Topic: clueless on box size

Posted By: arnshrty
Subject: clueless on box size
Date Posted: November 05, 2009 at 3:42 PM

I am needing a box volume for a sealed box and a ported box with port size. The sub is a 8" Dayton RSS210HF-4 and the specs are as follows:

Le (mH) @ 1kHz: 0.68

Fs (Hz): 28.3

Qms: 3.08

Qes: 0.68

Qts: 0.50

Mms (g): 66.02

Cms (mm/M): 0.48

Sd (cm2): 219.0

Vd (liters): 197.1

BL (Tm): 7.76

Vas (liters): 32.4

Xmax (mm): 9

VC Diameter (mm): 51

Usable Frequency (Hz): 27-1000

I've got access to several and would like to put them to good use.

Replies:

Posted By: DYohn
Date Posted: November 05, 2009 at 4:00 PM

For sealed, try about 32.5 litres (1.1 cuft) and for vented try about 65.8 litres (2.3 cuft) ported @ 23Hz (2" diameter round port 5.5" long)

-------------
Support the12volt.com

Posted By: arnshrty
Date Posted: November 05, 2009 at 4:17 PM

wow thanks for such quick response....i'm in the "toying" stage so I am open for all suggestions as far as for sq, spl, and so on. They are the High Fidelity series, not the High Output series, so yes I know I would probably be better of going sq with them

Print Page | Close Window