Hey Alpine dealers, does the Alpine CDA-9887 come with the Imprint system built in (requiring the user buy only the KTX-H100 mic and software kit) or does it require the PXA-H100 external device like the CDA-9886 does?
Thanks!
-------------
Support the12volt.com
Man I was trying to figure out the exact same thing a little while ago. Iver place you look at says the opposite of the other.
This is on Alpines page...
Sound Tuning
# MediaXpander: Built-In MediaXpander
# Time Correction: Built-In Time Correction
# Equalizer: Built-In Graphic/Parametric Equilizer
# Crossover: Built-In High-Pass/Low-Pass Crossover
# IMPRINT: IMPRINT Sound with MultEQ Acoustic Correction (KTX-100EQ
* Subwoofer Level Adjustment: -15dB to 0dB (1dB steps)
* Bass Center Frequency: 60/80/100/200Hz (Selectable)
* Bass Band Width Adjustment (Q): 4 choices (1 =wide, 4 =narrow)
* Bass Level Control Range: +/-14dB at 100Hz
* Treble Center Frequency: 10k/12.5k/15k/17.5kHz (Selectable)
* Treble Level Control Range: +/-14dB at 10kHz Band Graphic
* Time Correction: Adjustable 6 Ch. Time Correction (L-F/R-F/L-R/R-R/L-SW/R-SW)
* Crossover: Flat/6/12/18/24dB oct., 20-200Hz (High-Pass/Low-Pass)
* IMPRINT: Automatic Acoustic Correction & Computer Interface (KTX-100EQ Required)
-------------
UNLABELED Custom Car Club President
When you go to the recommend accessories, the tuning kit is the only thing there. All the other Head units list the processor And the tuning kit.
So My vote goes to: Imprint built in, Just get the tunning kit
-------------
UNLABELED Custom Car Club President
Built in but as stated you need the KTX-100EQ and software to use it.