2002 suburban onstar

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118439
Printed Date: May 23, 2024 at 1:52 PM

Topic: 2002 suburban onstar

Posted By: followmyrutz
Subject: 2002 suburban onstar
Date Posted: December 11, 2009 at 7:58 PM

i have an 02 suburban non-bose. do i need to install a OS-2 module? of course i cant use my onstar (not compatible to the new dgitial). i have installed a kenwood KVT-512 with GPS module, and did install the OS2, but is it absolutely necessary? if not can someone help with a wiring diagram? i have read that there is a pink wire on the 9pin connector, this is the amp turn-on???? right? if i dont use the os2, will i be abe to have my chimes? thanks for all the help and advise in advance.

Thanks,

Troy

-------------
Troy Nemes
FollowMyRutz.com

Replies:

Posted By: i am an idiot
Date Posted: December 11, 2009 at 8:46 PM

You will lose your chimes if you do it without the OS-2.
Yes the pink wire is the amp turn on wire.

Posted By: another-kelly
Date Posted: December 11, 2009 at 11:08 PM

i am an idiot wrote:

You will lose your chimes if you do it without the OS-2.
Yes the pink wire is the amp turn on wire.

correct on the pink wire, but an '02 won't lose the chime. that's just '03 and newer

Posted By: followmyrutz
Date Posted: December 12, 2009 at 7:38 AM

awesome thank you

-------------
Troy Nemes
FollowMyRutz.com

Posted By: followmyrutz
Date Posted: December 12, 2009 at 7:40 AM

i did think of another question, is there a way to still retain the factory tape player wiring everything direct? i dont use it, but the minute i dont have it, ill wish i did......lol

-------------
Troy Nemes
FollowMyRutz.com

Posted By: i am an idiot
Date Posted: December 12, 2009 at 7:44 AM

<<<< I did not even pay attention to the year. Thanks Kelley