jvc kd ahd59 problem

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118498
Printed Date: May 09, 2025 at 1:41 PM

Topic: jvc kd ahd59 problem

Posted By: goblue9976
Subject: jvc kd ahd59 problem
Date Posted: December 13, 2009 at 6:11 PM

I just bought a JVC KD AHD59, everything is hooked up properly (all wires are connected exactly right,) and if I hit the display button or eject the radio comes on, but if I hit the power button nothing happens. Any ideas?

Replies:

Posted By: goblue9976
Date Posted: December 13, 2009 at 6:12 PM

Its in a 2006 gmc canyon without onstar, sorry.

Posted By: goblue9976
Date Posted: December 13, 2009 at 6:12 PM

Its in a 2006 gmc canyon without onstar, sorry.

Posted By: i am an idiot
Date Posted: December 13, 2009 at 6:40 PM

Did you use a volt meter to verify that you have voltage on the red and yellow wires of the radio? When doing so, use the case of the radio for the ground reference for your meter.

Print Page | Close Window