wiring, punch 400-4

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119060
Printed Date: April 19, 2024 at 3:47 AM

Topic: wiring, punch 400-4

Posted By: laro2003
Subject: wiring, punch 400-4
Date Posted: January 03, 2010 at 1:12 PM

i have a punch 400-4. i have a set of jl c5650 rated 75 watts rms
the punch is rated 4x50 at 4 ohms 100x4 at 2 ohms the pvc that came with it says the amp is rated 4x74 4 ohm an 124 x4 at 2 ohm this is at 14.4 volts im not getting 14.4 volts all the time to this amp even with a capacitor. the capacitor usually shows 13.8 or 14.1 it usually 13.8.
my question is there any way to wire up my jl speakers to get a 2 ohm load from the front channels of this amp

Replies:

Posted By: i am an idiot
Date Posted: January 03, 2010 at 1:54 PM

Print Page | Close Window