titan factory auxillary plug wiring?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119166
Printed Date: May 09, 2025 at 11:23 PM

Topic: titan factory auxillary plug wiring?

Posted By: joseph7071
Subject: titan factory auxillary plug wiring?
Date Posted: January 07, 2010 at 12:27 PM

I'm trying to convert the factory stereo aux plug to rca so that it will work with aftermarket headunit. Does anyone have a diagram of the factory aux harness? Thanks for any help.

-------------
autoevolution

Replies:

Posted By: joseph7071
Date Posted: January 07, 2010 at 12:28 PM

It is an 08 nissan titan.

-------------
autoevolution

Posted By: i am an idiot
Date Posted: January 07, 2010 at 1:25 PM

Do you have an ohm meter? If so plug your 1/8 to 1/8 cable into the jack, and use the meter to determine which wire is connected to whick pin of the 1/8 inch plug. The tip of the plug is left channel the middle section is right channel and the base is shield.

Posted By: joseph7071
Date Posted: January 07, 2010 at 2:01 PM

Thanks for the info, i had just figured it out by trial and error before i read your response, but the next one will sure be easier with that knowledge.

-------------
autoevolution

Print Page | Close Window