best wiring for monoblock amp anp 2 subs
Printed From: the12volt.comForum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119855
Printed Date: May 15, 2025 at 5:20 PM
Topic: best wiring for monoblock amp anp 2 subs
Posted By: izzy209
Subject: best wiring for monoblock amp anp 2 subs
Date Posted: February 02, 2010 at 11:45 PM
Replies:
Posted By: j.reed
Date Posted: February 03, 2010 at 1:13 AM
What is the model number for the amp? They have made both 1ohm stable and 2ohm stable mono amps. Need to know what amp it is to suggest you best wiring option, but here is a link to your wiring options depending if it is 1ohm or 2 ohm stable. (2) DVC 4 ohm sub wiring diagram. If it is a 1ohm stable amp you can use option 1 for a 1ohm load. If it is a 2ohm stable amp you are limited to option 2 running it at a 4ohm load.
As for the 2 sets of positive and neg. If it is a mono block they are connected internally. This is done for ease of instillation when using more than one connection at the amp.
If you set gain properly you should be fine if it is less then rated power or more than rated power to the subs. How to set gain topic.
-------------
As for the 2 sets of positive and neg. If it is a mono block they are connected internally. This is done for ease of instillation when using more than one connection at the amp.
If you set gain properly you should be fine if it is less then rated power or more than rated power to the subs. How to set gain topic.
-------------