vented box?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119913
Printed Date: May 14, 2024 at 9:16 PM

Topic: vented box?

Posted By: efx3307
Subject: vented box?
Date Posted: February 04, 2010 at 11:27 PM

i jus bought two kicker cvr10 07 series there two ohm. i want to build a vented box for them but have no idea on what frequency to tune them nor what size the box should be. been in car audio for a while but this is my first experience building a vented box. if any one has had a good setup with these subs before it would be helpful. thanks guys

-------------
Bentley

Replies:

Posted By: j.reed
Date Posted: February 04, 2010 at 11:56 PM

Page 12 will show you the projected freq curves for the 1.25cuft, 1.5cu.ft. and 1.75cu.ft ported enclosures. Page 22-24 will show you the enclosure designs used. Also some other nice building tips in there explaining port folding and basic construction. Sealed enclosure are also covered in that manual.

Kicker CVR tech manual.

-------------
posted_image

Posted By: efx3307
Date Posted: February 05, 2010 at 9:17 AM

i have two subs what adjustments should i make to those dimensions

-------------
Bentley

Posted By: DYohn
Date Posted: February 05, 2010 at 11:31 AM

efx3307 wrote:

i have two subs what adjustments should i make to those dimensions

Double them.

-------------
Support the12volt.com

Print Page | Close Window