does anyone know where to locate an amp?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119998
Printed Date: May 14, 2025 at 7:43 AM
Topic: does anyone know where to locate an amp?
Posted By: autobon
Subject: does anyone know where to locate an amp?
Date Posted: February 09, 2010 at 1:44 AM
Does anyone know where to locate an stock amp in a 95 Range Rover? If so can you give me a diagram for it so I can locate the output wires? Reason being I installed a after market stereo and I need to bypass the amp.
-------------
Thanks
Replies:
Posted By: i am an idiot
Date Posted: February 09, 2010 at 6:19 AM
 |
Amp Location |
|
UNDER PASSENGER SEAT |
Posted By: yimke
Date Posted: February 09, 2010 at 10:03 AM
Before you start bypassing, did you connect the Remote turn on wire for the amp?
Are you not getting sound or something? Power up the P-Antenna connection on the aftermarket harness with your remote turn on output.
Posted By: autobon
Date Posted: February 18, 2010 at 4:45 PM
I am guessing the remote turn on output is on the amp could you give some sort of indicator on how to find the turn on output? Yimke you are right! What is happening is their is no sound coming out of the door speakers when I hook them up to the harness. For now I just hooked 2 6x9's straight to the aftermarket deck. However, I can barely hear any highs. Thanks for your help.
-------------
Thanks
Posted By: zappo90744
Date Posted: March 11, 2010 at 11:19 AM
What you could have done was tested for this wire while having the factory deck in. Since there is a factory amp in the vehicle sometimes there is a separate plug that connects to it and you could've tapped into those wires to see which one sends out the signal to click the amp on.
|