Print Page | Close Window

making an aux input

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120385
Printed Date: July 07, 2025 at 7:54 PM


Topic: making an aux input

Posted By: fronedaddy
Subject: making an aux input
Date Posted: February 26, 2010 at 7:53 PM

Hope someone can help. I want to add an aux input to my '03 Ram 2500 with the RBQ model 6 disc changer. I know they sell kits for this but I think they are WAY overpriced and would rather make my own and get more satisfaction out of something I made on my own.

I'm sure there is a way that I can either wire one into my antenna on a switch somehow or into the speaker wires but I really don't know how, that's where you guys come in. I figure there has to be a way to do this that is inexpensive but I don't know how.

Thanks!!




Replies:

Posted By: Velocity Motors
Date Posted: February 28, 2010 at 10:25 AM
The modules are not over priced if you think about it............... they're designed to save you time as well as they are plug and play. This helps from having to cut into OEM wires and potentially damaging the factory unit. You can get a basic AUX input module from PAC ( AUX-BOX ) and AB-CHR10 adaptor cable for less than $ 90. THis is a plug and play solution for your truck and takes less than 10 minutes to install.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window