JVC avx-77
crappy scosche interface
monster cable 6ch rcas, 4 gauge power and ground
memphis 5 channel 5.1400 amp
alpine type s coxials x4 doors
https://www.tccustomz.com/inc/sdetail/179 this for a box
and not sure about subs yet maybe alphasonik 2010 line? something 4 ohm dvc
im wanting to run all three subs inverted
what you think ? kinda new at this any suggestiuons? still planign how to hide the wires from the inverted subs
any suggestions on this plan?
Sup DD, hey man congrats on your interest in the audio world but there a lot you need to learn and I encourage that you study as much as possible prior to jumping the gun on a system. Are you looking to do this install yourself? For the best professional advice, you cant find a better place, but there are quite a few things that a installer might question with the system your looking at here. ie; 3 sub config, big 3 and so on.
-------------
This is what I do for FUN!
I would suggest you take your plan back to the drawing board. Lets talk more about what it is you are trying to accomplish and then figure out the best way to get you there.
-------------
Top Secret, I can tell you but then my wife will kill me.
hey wana know some input on this situation.
one 5ch amp running front rear and sub ch's or 1 four ch for front and rear and a mono for sub
- whats more efficent? easier to tune ? sound quality? smaller footspace?
im thinking maybe
memphis belle mc 5.1400 i can get for $1500
jl 1000/1 v2 and jl 300/4 $1600
alpine mcd 2000 mcd 300/4 1000
i wana run 3 12" 4 ohm dvc subwoofers
in can wire them in series/parallel for a 2.67 load
whats my best bet?