turn off auto remote wire feature in amp
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120665
Printed Date: May 12, 2025 at 10:23 PM
Topic: turn off auto remote wire feature in amp
Posted By: bigmikeww
Subject: turn off auto remote wire feature in amp
Date Posted: March 11, 2010 at 8:15 PM
Hello All,
I installed a pioneer GMD7500M Amp and the customer wanted to be able turn the amp on/off on command. So, like most amps I installed a switch under the dash to turn on/off the remote wire. The amp has an auto turn on feature. I thought if the amp saw the remote wire was there then it would turn off, but it doesn't. Any bypass ideas??
Thanks in advance.
Mike
Replies:
Posted By: i am an idiot
Date Posted: March 11, 2010 at 9:36 PM
Pac-audio.com makes an inline volume control. It connects in the RCA cable and can turn the volume all the way down. I do not remember if it is the LC-1 or the LC-2. One of them is just an RCA volume control. The other is a line-out-converter with integrated volume control.
Posted By: bigmikeww
Date Posted: March 11, 2010 at 10:05 PM
thanks, i will look into this. Does anyone know of another option?
Posted By: smtgolf
Date Posted: March 11, 2010 at 10:26 PM
Maybe not your first choice but swap amps since all the wiring is done. Anything without the auto-turn on feature would be a drop in replacement. I understand this may not be possible but it could save more headache trying to work something else out with PAC accessories.....
|