concord ca50.2 amplifier

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120687
Printed Date: May 12, 2025 at 3:24 PM

Topic: concord ca50.2 amplifier

Posted By: b1mmuo27
Subject: concord ca50.2 amplifier
Date Posted: March 12, 2010 at 3:07 PM

I have a Concord CA50.2 100W RMS digital reference series amp. Yes it shows my age as I have had it since I was a kid. In my 96 Dodge Ram pickup I have a pair of Kenwood component speakers in the front doors. I have a pair of kicker 6" coax's in the back. Can I run the amp to both front & back or what would be the best alternative. The deck is a Pioneer Premier DEH-P710BT as my older deck was just stolen from my truck. I also have pair of Alpine 6" x 9" coax's that I had in another truck. Thanks

Replies:

Posted By: DYohn
Date Posted: March 13, 2010 at 9:08 AM

Concord amps were made by JBL and are actually really decent. I believe they are only rated for a 4-ohm per channel load, so your best bet is to connect it to just the front speakers, then use either the HU power or another amp for the rears.

-------------
Support the12volt.com

Posted By: b1mmuo27
Date Posted: March 13, 2010 at 12:49 PM

Thanks. After tweaking the settings on the Pioneer it sounds great. No need for the amp. It has 50W rms mosfet x 4 output so I had to do the learning curve. Thanks for your input.