memphis st 1000d too much for two jl w6?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120858
Printed Date: May 17, 2024 at 4:48 PM

Topic: memphis st 1000d too much for two jl w6?

Posted By: mcdavid000
Subject: memphis st 1000d too much for two jl w6?
Date Posted: March 21, 2010 at 9:26 PM

I got a Memphis st 1000d. I was wonder if someone could tell
if it would be a good choice for two jl w6. And if so the best way
to wire. Bridged or not?

Replies:

Posted By: diamondaudioguy
Date Posted: March 22, 2010 at 1:22 AM

Ok first off what size is the subs 13.5"/10" that amp is more than capable to push both sizes.if u have the 13.5" subs just wire them to 1ohm and make sure u run at least 4gauge power and ground cables. https://www.the12volt.com/caraudio/woofer_configurations.asp~Q~2~I~42

Posted By: mcdavid000
Date Posted: March 22, 2010 at 9:32 PM

Well there 12w6v2. But I actually sold the Memphis today. I was

Looking for some input on what would be a good amp choice ?

To match up to rms. -watts ? I have always been fond of kicker

For there true power. And if anyone knows ported box specs. for the

The subs.

Print Page | Close Window