clipping on the soundstream trx 880.4

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120961
Printed Date: May 14, 2025 at 8:26 AM

Topic: clipping on the soundstream trx 880.4

Posted By: daniel gt1
Subject: clipping on the soundstream trx 880.4
Date Posted: March 25, 2010 at 2:05 PM

is there a way 2 bypass it internaly,cause it clips all the time,..so can i open it up and like solder somthing ?

Replies:

Posted By: i am an idiot
Date Posted: March 25, 2010 at 3:14 PM

What are you wanting to bypass?

Posted By: nodiggie
Date Posted: March 25, 2010 at 5:50 PM

need more info for response.

what are the impedance loads on each channel?

Are you bridging the amp?

how are your gains set?

power/ground cable sizes?

Put as much specific info that you can and ppl here would be glad to help.

-------------
Still learning

Kraco

Posted By: daniel gt1
Date Posted: March 26, 2010 at 8:13 AM

Well i think it sounding like a end-user prob realy...but if nothing wrong with the amp, then its definitely an install problem....will check over the gains and retune all over again...thx for all your help guys. posted_image

Print Page | Close Window