failure to turn on

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121167
Printed Date: April 28, 2024 at 5:07 AM

Topic: failure to turn on

Posted By: bowerland
Subject: failure to turn on
Date Posted: April 05, 2010 at 3:25 AM

I am installing a Blaupunkt Buenos Aires 200 to an old Land Rover. Power,earth and fuse are OK. Get slight static for a second or two, no illumination, then nothing.Does the Remote Turn On wire need connecting to (power?) posted_image

Replies:

Posted By: KPierson
Date Posted: April 05, 2010 at 6:37 AM

the remote turn on is an OUTPUT not an INPUT. Make sure you have 12vdc on the constant and switched wires and the ground grounded.

-------------
Kevin Pierson

Posted By: i am an idiot
Date Posted: April 05, 2010 at 8:51 PM

And the ONLY way to check the above is with a METER.

Posted By: darksidecelica
Date Posted: April 11, 2010 at 6:30 PM

And also use a dmm to verify that the fuse is good. Looking at it isnt as foolproof as you would think.

Posted By: boxhead78
Date Posted: April 14, 2010 at 9:12 PM

what year is the the land rover

-------------
boxead78

Print Page | Close Window