Print Page | Close Window

best way to wire kicker dvc to monoblock

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121241
Printed Date: July 13, 2025 at 6:28 PM


Topic: best way to wire kicker dvc to monoblock

Posted By: mastermindz
Subject: best way to wire kicker dvc to monoblock
Date Posted: April 09, 2010 at 2:10 AM

I wanted to know what is the best way to wire a 15' kicker L7 4 ohm dvc to a kenwood 9103d amp?? Is it better to wire each vc to it's own channel or series or parralel?

-------------
Mastermindz



Replies:

Posted By: ianarian
Date Posted: April 09, 2010 at 2:22 AM
I cant see one superseding the other if you have the right gauge wire. I'd run 1 wire/coil out of preference. Its easier that way when using like 8ga wire because you cant fit a splice(2 wires) in the terminals of the sub.

-------------
This is what I do for FUN!





Print Page | Close Window