what would the ohms be?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121916
Printed Date: May 15, 2025 at 7:21 PM

Topic: what would the ohms be?

Posted By: romitio222
Subject: what would the ohms be?
Date Posted: May 20, 2010 at 1:25 AM

image is a quick example of how these subwoofers are wired, not sure what ohm load would be on amp.

posted_image

Replies:

Posted By: i am an idiot
Date Posted: May 20, 2010 at 6:23 AM

If the negative non bridged terminal is broken, both of the non bridged terminals are connected together. Simply connect the left negative wire to the right positive screw along with the right positive speaker wire.

The diagram you posted will be a 4 ohm load. 4 ohm mono is the same exact electrical load as a 2 ohm stereo load.

Print Page | Close Window