randomly no sound

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122019
Printed Date: April 28, 2024 at 7:43 PM

Topic: randomly no sound

Posted By: birdii
Subject: randomly no sound
Date Posted: May 26, 2010 at 9:20 PM

I'm having some weird problems. My amps powers up fine with 14volts (If I get low voltage my amps warns me). The amps don't shut off or go into protection mode, the sound cuts randomly on each amp when it wants to at low or high volumes. Any ideas?

Thanks

HU - Kenwood DNX9960

[img]https://img192.imageshack.us/img192/1092/72796284.jpg[/img]

Replies:

Posted By: lspker
Date Posted: May 26, 2010 at 9:50 PM

Are you sure its the amp? Just had e-mail from Kenwood about 9960 decks ramdomly rebooting, they have software update to fix....... check with your dealer.

Posted By: j.reed
Date Posted: May 27, 2010 at 12:26 AM

I would make sure to update the deck as well.

I do have to ask a question though. I was just looking at you schematic you made. Are you really running a 200A fuse on 4 gauge wire? You know it can only carry 150A safely, right?

-------------
posted_image

Posted By: icearrow6
Date Posted: May 29, 2010 at 1:47 PM

Also the remote wire i would suggest to use a relay between the amps and the stereo. this of course AFTER you update your deck.

-------------

Print Page | Close Window