stock speaker vs new ones with a new radi

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122100
Printed Date: May 10, 2024 at 5:20 AM

Topic: stock speaker vs new ones with a new radi

Posted By: huizenga7
Subject: stock speaker vs new ones with a new radi
Date Posted: June 02, 2010 at 12:08 AM

i recently put in a a 7 inch touch screen dvd/radio player in my 06 ford f150 and when i turn the volume up halfway or a little more the sounds gets distorted. would installing better speakers in my truck help solve the problem or would i have to replace the speaker wire and speakers?

-------------
2006
Ford F150 Fx4

Replies:

Posted By: topinstaller200
Date Posted: June 03, 2010 at 2:58 AM

curious, what Brand and model head unit did you get?

Reason I ask is because alot of these discounted dvd/tv combos dont have great sound quality or decent output. therefore crap in = crap out.

replace your 6x8 speakers with decent brand name speakers like Pioneer, JVC, or Clarions

add a small 4ch amp with high pass crossovers. As long as you stay around 50 watts RMS per channel it is ok to use your factory speaker wire. set x overs at 125Hz high pass

down the road get one 10" sub under or behind the seat with a small sub amp and you will have a cool little system

Posted By: nismo542
Date Posted: June 06, 2010 at 12:51 AM

most likely it is a lack of power issue from the headunit. you could change the speakers and still have an issue. upgrade to a 4ch amp and some decent aftermarket speakers.