truck stereo system

1996, dodge dakota, ext cb , diy built box in back seat , 2 pioneer premier ts-sw1241d, 1400w max, 350w nom. i am using a pioneer gm-x314 amp , . i want to add a clario 900eqa, ( 9 band ) 25 wx4ch . will this work ?
i would like to communicate with someone that can " guide me " in the right direction , i want to show grandkids that PAWDOC can rock . ( blues , classic rock , )

could not find the specs of the amp. i think 70x2 @2 ohms,  if that is right, not enough power for the subs.    The subs are SVC at 4 ohms, so you will be seeing  2 or 8 ohms if you wire them together.  You could do a large sealed enclosure to reduce the mechinical power of the subs, but each one is rated at 350watts.  you may want a larger amp.

okay , it's 30x 4 , or 70x 2 .. should i bridge the amp ?.. what about 1 amp per sub , at that output ? right now i have the 2 subs , in the box , 2, 5" blaupunkt in the built consel , . i want to add 2, 6x9 in the factory cutouts , and possibly add the small bose ( surround ) speakers , for the highs .. , will the clarion 900EQA benifit this ? i am not want to take it to a stereo contest , just enjoy my music at a higher volume than i had before . i don't think it was hooked up proper, thank you , in advance , for your time and cooperation

yes 1 amp per sub bridged would be better.  But first how many cubic feet is you box for the subs?  Is there a divider between the subs or do they share the same air space?  A EQ is always in added benifet, but I'm not sure about the bose speakers.  Are the 5" blaupunkt going to be running off the headunit?

1 amp per sub . okay . i built the box silmilar to the box it was in ,just added a twist , each sub has it's own air space . headunit? i'm a rookie , 12volt calls me . thinking bout clarion 900EQA for the blaupunkt, in the consel ; and the bose , in the back corner . with the subs in place of the back seat .. box iss made so i can still get jack out