Print Page | Close Window

2010 kia sportage firewall hole

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122542
Printed Date: May 02, 2024 at 1:06 PM


Topic: 2010 kia sportage firewall hole

Posted By: kia04
Subject: 2010 kia sportage firewall hole
Date Posted: July 05, 2010 at 10:58 AM

i have a 2010 kia sportage v6 2.7L. i am trying to run my 4 guage battery wire threw the firewall, but the mailn problm i am having is... on the engine side it looks like there is a spot to put a hole since i did not find one, but on the inside i have 3 comp modules all mounted in the same general area. any suggestions on what to do? i have been installing for many years, but its this one that i cant even try to locate  some what of a clear spot to do it. thanks in advanced....  



Replies:

Posted By: topinstaller200
Date Posted: July 05, 2010 at 11:39 AM

If your vehicle is automatic the drill through where the factory clutch would go. if Manual then about 4 inches lower than clutch area





Posted By: kia04
Date Posted: July 05, 2010 at 11:42 AM
all the computer stuff is all mounted there 3 of them





Print Page | Close Window