fun project with 4 re audio mt18’s
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122562
Printed Date: April 23, 2024 at 5:42 AM
Topic: fun project with 4 re audio mt18’s
Posted By: soundnsecurity
Subject: fun project with 4 re audio mt18’s
Date Posted: July 07, 2010 at 4:28 PM
whats going on everybody, in just a few days i will be starting on a serious SPL vehicle build. the truck is a 06 ford F-250 with a linex'd interior. i will be installing 4 MT 18's on 4 soundstream XXX4000D's( one per sub). right now im waiting to order some dynamat so i can do the whole truck.
i was wondering if anyone had any experience with these subs or any suggestions on how to build the wall to get the most out of these subs.
i spoke with some people at RE and they say im on the right track but it never hurts to get everyone's opinion.
-------------
Replies:
Posted By: icearrow6
Date Posted: July 07, 2010 at 4:54 PM
is this an extended crew cab? or is this a blow through bed setup?
The amps kick ***, but i don't have any experience with those woofers.
-------------
Posted By: soundnsecurity
Date Posted: July 07, 2010 at 5:13 PM
it is the extended cab but not the full crew cab the box im making so far will have about 20ft^3 internal without port or woofer displacement. the 4 18's will leave me about 13 inches for the with of the port and about 35 for the port height the depth is still being figured out. i want to tune high for true spl but im really tempted to build a pull out port so i can have another port on the side that is tuned low for ground pounding.
-------------
Posted By: icearrow6
Date Posted: July 07, 2010 at 5:54 PM
so... 2 enclosures?
sounds like late nights at the shop. lol
what do u have plan for the charging system?
-------------
Posted By: jmelton86
Date Posted: July 08, 2010 at 4:55 AM
From what I've heard, they like a 40Hz tuning. ------------- 2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
Posted By: soundnsecurity
Date Posted: July 08, 2010 at 9:34 AM
no, just one enclosure, but two different interchangeable ports. one tuned to about 70hz and the other tuned to about 40hz. charging system is still in the works but i know i will be using at least 8 kinetic 2400's and more than likely a dual 250A alternator setup and 5 battery isolators.
-------------
Posted By: jvillefinest
Date Posted: July 12, 2010 at 1:55 PM
wait why would you use 5 battery isolators?
-------------
2007 Acura TSX
SQ setup in the works
|