2006 toyota tundra wiring

Hello can someone please help I brought a double din dvd player for a 06 toyota tundra and bought the wrong harness tried to wire it anyway, i cut the original harness and tried hardwiring but dont know all of the wire colors and what wire goes to what, ionly have most of the speaker wires,ground. please help. let me know what i need iam thinking i have to replace the original harness and get the right harness for the unit i have. thanks in advance.

Does the Radio or any of the speakers have a JBL logo printed on them?

When you cut the harness, did you have the key turned on and cut all the wires at the same time?  If so you have 2 blown fuses in the fuse box.  You did not mention that you had located either of the 2 power wires.

i believe the two power wires are red with green strip and gray

i cut the wires withe cut off

no its not a JBL

	Battery		BLUE / YELLOW		(+)		RADIO HARNESS
	Accesory		GRAY		(+)		RADIO HARNESS
	Ground		BROWN		(-)		RADIO HARNESS
	Illumination		GREEN		(+)		RADIO HARNESS
	Amp Turn On		PINK/BLUE		(+)		RADIO HARNESS
	LF Speaker (+)		PINK
	LF Speaker (-)		VIOLET
	RF Speaker (+)		GREEN
	RF Speaker (-)		BLUE
	LR Speaker (+)		BLACK
	LR Speaker (-)		YELLOW
	RR Speaker (+)		RED
	RR Speaker (-)		WHITE

The Note for the battery wire does read (RED)

thanks but my harness doesnt show  some of those colors like battery blue/ yellow only blue for green illumination which green i remove a 20pin thats the largest and another 20 pin thats smaller also its another harness i didnt cut which wires are need iam sorry to be so ignorant to this but its my first time doing this. thanks in advance.