Print Page | Close Window

is it possible, drop speaker ohm rating?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122751
Printed Date: April 25, 2024 at 9:19 AM


Topic: is it possible, drop speaker ohm rating?

Posted By: jnorine
Subject: is it possible, drop speaker ohm rating?
Date Posted: July 19, 2010 at 3:51 PM

My factory HU (cannot be replaced) is 2 ohm. I would like to replace my factory speakers but aftermarket speakers are mostly 4 ohm. Is there anything I can do to drop the ohm of the aftermarket speakers to match my HU?




Replies:

Posted By: DYohn
Date Posted: July 19, 2010 at 4:26 PM
jnorine wrote:

My factory HU (cannot be replaced) is 2 ohm. I would like to replace my factory speakers but aftermarket speakers are mostly 4 ohm. Is there anything I can do to drop the ohm of the aftermarket speakers to match my HU?

No, but if you want to purchase 2-ohm after market speakers, check out Infinity Kappas.



-------------
Support the12volt.com



Posted By: jnorine
Date Posted: July 19, 2010 at 4:58 PM
Will do. Thanks.


Print Page | Close Window