hifonics boltar xi
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122840
Printed Date: May 18, 2025 at 10:11 PM
Topic: hifonics boltar xi
Posted By: phoenix13
Subject: hifonics boltar xi
Date Posted: July 26, 2010 at 1:19 AM
Hi, Is this a good amp? I done some searching and find alot of info on the zed designs, was wondering if this later model still had quality or is it more like a Maxxsonics.
Replies:
Posted By: i am an idiot
Date Posted: July 26, 2010 at 6:26 AM
It is not the quality of the ZED products. But it is not near as bad as the Maxxsonics stuff. There was a brief (2 years I think) period between the Zed and Maxxsonics era, but definitely not as good as the Zed stuff.
Posted By: phoenix13
Date Posted: July 26, 2010 at 7:15 PM
would you know what the power ratings in stereo and mono, thanks for your help.
Posted By: i am an idiot
Date Posted: July 26, 2010 at 10:04 PM
The only info I can find states that it is a 2 x 225 watt amplifier. From the era that amp was made, they were rated with their 4 ohm per channel rating. So I am sure that it is rated at 225 x 2 into 4 ohms. that would be 450 x 1 into an 8 ohm load. The guessing comes in to play on the following . 2 x 300 into 2 ohms. which would translate into 600 X 1 into 4 ohms.
Posted By: i am an idiot
Date Posted: July 26, 2010 at 10:55 PM
After looking at the specs of some of the other series XI amplifiers, the 2 ohm per channel rating was probably 350 X 2 into 2. This would translate into 700 X 1 into 4 Ohms.
Posted By: phoenix13
Date Posted: July 27, 2010 at 1:23 AM
Thanks for the info.
|