ohm ?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12291
Printed Date: August 21, 2025 at 10:46 PM

Topic: ohm ?

Posted By: HONDAFREAK
Subject: ohm ?
Date Posted: April 16, 2003 at 7:40 PM

hey everyone! if i was to run speaker wire to a crossover at 4ohm stereo then run my midbass driver out and my tweeter out if i was to add another set of tweeters off of the crossover would it still be at 4ohm stereo or 2ohm stereo thanks for the help

Replies:

Posted By: bberman1
Date Posted: April 16, 2003 at 9:48 PM

Do you have model #’s of the all the speakers?

Posted By: HONDAFREAK
Date Posted: April 16, 2003 at 9:56 PM

yes they are interfire 6.5 components ifc-650 and the tweeters areif-t10 they are all 4ohm

Posted By: bberman1
Date Posted: April 16, 2003 at 10:10 PM

Yes if your components (mid and tweeter) together as one are 4 ohm and you add a 4 ohm tweeter to them you will have a 2 ohm load

Posted By: HONDAFREAK
Date Posted: April 16, 2003 at 10:19 PM

thanks for your info

Posted By: bberman1
Date Posted: April 16, 2003 at 10:24 PM

Your Welcome

Posted By: x6369x
Date Posted: April 16, 2003 at 10:54 PM

It would be a 2 ohm load above the tweeter cross-over frequency. It shouldn't over work the amp at all.

-------------
Friends Don't Let Friends Bump Stock.

Print Page | Close Window