amp install to factory stereo
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12293
Printed Date: August 21, 2025 at 6:46 PM
Topic: amp install to factory stereo
Posted By: rsoto
Subject: amp install to factory stereo
Date Posted: April 16, 2003 at 8:04 PM
I need to know how to wire an Amp to the factory stereo of a 2000 accord. I know you need a speaker to rca converter, but I need to know how to wire it up. I think I might have fried the stereo's outputs.
Replies:
Posted By: bberman1
Date Posted: April 16, 2003 at 9:45 PM
Are you installing a sub amp or an amp for your mids and highs?
Posted By: x6369x
Date Posted: April 16, 2003 at 10:41 PM
The easiest place to tap the speaker wires is @ the rear deck speakers if you adding a sub amp. I hate to cut into factory radio harnesses.
Why do you think you fried the outputs? What are the symptoms? No output at all, front or rear? I would disconnect everything that you've done, and put everything back to the way it was. If that still doesn't work, your assumption may be correct.
-------------
Friends Don't Let Friends Bump Stock.
|