woofer, amp wiring, will this work?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123099
Printed Date: April 29, 2024 at 2:29 PM

Topic: woofer, amp wiring, will this work?

Posted By: nattyiceking
Subject: woofer, amp wiring, will this work?
Date Posted: August 12, 2010 at 8:03 PM

I recently purchased two 12" dvc 4ohm Hifonics BRZ12D4's rated at 600w RMS and the Hifonics HFi1000D monoblock amp which is rated at 1000w RMS @ 1ohm/475w @ 4ohm. The two subs add up to 1200w RMS, would it be safe to wire them up for 1ohm? I'm trying to avoid any possible risks before I put it all together. Any input would be greatly appreciated.

Replies:

Posted By: nattyiceking
Date Posted: August 12, 2010 at 8:33 PM

I forgot to post this before but I'm also looking for any tips on tweaking this amp. Does the boost knob act as the gain??

Posted By: roadshop570
Date Posted: August 12, 2010 at 11:24 PM

Its fiine to run at 1ohm and you'll get the most from your amp, start with 3/4 gain on the amp, set bass boost at full gain and set your LPF at around 75hz, if you have a subsonic filter start at 30hz, this will get you started with only minor adjustments after, the bass boost isnt the gain but usually depending on the amp it focuses maximum bass at a preset frequency or variable frequency if the option is on the amplifier.

-------------
Chadillac

Posted By: i am an idiot
Date Posted: August 13, 2010 at 7:02 AM

Level = Gain

Posted By: nattyiceking
Date Posted: August 19, 2010 at 7:10 PM

Thanks for the tips roadshop, I hooked everything up today and it sounds awesome posted_image

Print Page | Close Window