protection mode

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123472
Printed Date: April 19, 2024 at 7:15 AM

Topic: protection mode

Posted By: garrett12
Subject: protection mode
Date Posted: September 12, 2010 at 6:10 AM

my amp goes into protect mode as soon as it turns on and stays in that mode... ive tried everything. it worked fine until i changed the ground wire out to a shorter one, hoping that would eliminate some road noise but that didnt happen. can anyone help me with this problem

Replies:

Posted By: i am an idiot
Date Posted: September 12, 2010 at 7:27 AM

The following link will help you with your Road Noise. https://bcae1.com/images/rca/temporaryrcashieldrepair.html

As far as the amp being in protect, you need to use a volt meter to make sure the amp is getting a good ground from the new ground point. Or ground it to the old ground point. It was a good ground if the amp worked when it was grounded there.

Posted By: DYohn
Date Posted: September 12, 2010 at 9:43 AM

Try disconnecting the speakers and see if the amp will come on. Also, when you moved the ground, did you make sure the power to the amp was off (fuse pulled) before you started? If not, the amp could now be toast...

-------------
Support the12volt.com

Posted By: garrett12
Date Posted: September 13, 2010 at 8:27 AM

yea i had taken all the fuses out when i did it.... ive tried all of that. thank you for the ideas. i wish i knew a place that would repair it somehow. ive had it for 3 years. if i cant get it fixed i guess ill buy a new one.

Posted By: DYohn
Date Posted: September 13, 2010 at 1:15 PM

Test the voltage (like was already suggested) and if it's good, sounds like the amp is dead. Yes there are some plaes that will repair amps if it's worth repairing. What's te make and model?

-------------
Support the12volt.com

Posted By: i am an idiot
Date Posted: September 13, 2010 at 3:40 PM

Am I invisible again?

Posted By: DYohn
Date Posted: September 13, 2010 at 4:55 PM

i am an idiot wrote:

Am I invisible again?

Nope. I fixed my post. :)

-------------
Support the12volt.com

Posted By: i am an idiot
Date Posted: September 13, 2010 at 5:26 PM

I knew YOU could see me.

Posted By: DYohn
Date Posted: September 13, 2010 at 5:56 PM

i am an idiot wrote:

I knew YOU could see me.

Did you say something?? posted_image

-------------
Support the12volt.com

Posted By: i am an idiot
Date Posted: September 13, 2010 at 7:35 PM

Apparently not.

Posted By: 66sportfury
Date Posted: September 18, 2010 at 10:31 PM

garrett12 wrote:

yea i had taken all the fuses out when i did it.... ive tried all of that. thank you for the ideas. i wish i knew a place that would repair it somehow. ive had it for 3 years. if i cant get it fixed i guess ill buy a new one.

what is your amp? brand and model #

-------------
ac delco am radio and sparkomatic 40 watt sound exploder

Posted By: still_walkin
Date Posted: September 19, 2010 at 4:49 AM

check to see if the rcas are good unplug one channel and see how it acts. now swap them and see what happens

-------------
1993 sdv
Alpine 4x6 6x9 5 1/4 swr-10d4
alpine v60
12.5 VGA flip down
Nettop pc w/10" touch screen
78nova
5-re audio 5x7 ,10" sub &
Xtx-500.5
"Take the faceplate off get the jumperpack"

Print Page | Close Window