Print Page | Close Window

jvc ks es200 eq

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124030
Printed Date: July 12, 2025 at 8:30 AM


Topic: jvc ks es200 eq

Posted By: Elizstoy
Subject: jvc ks es200 eq
Date Posted: October 20, 2010 at 3:11 PM

I am looking for the wiring diagram for the JVC KS-ES200 Equalizer any help would be great thanks.

-------------




Replies:

Posted By: i am an idiot
Date Posted: October 20, 2010 at 8:41 PM
How many and what color are the wires?




Posted By: Elizstoy
Date Posted: October 21, 2010 at 3:42 AM
Its a five wire. I do not know the colors as i do not have the wiring harness. Attached should be a picture from sonic. Closest pic i can find of the harness.

posted_image

-------------





Posted By: Elizstoy
Date Posted: October 21, 2010 at 3:52 AM
posted_image

-------------





Posted By: highsierra
Date Posted: October 21, 2010 at 10:55 PM
Can you take some pics of the back of that unit for me?
Is it a 2 way or 3 way?

-------------
Brian Depew
High Sierra Window Tint




Posted By: Elizstoy
Date Posted: October 22, 2010 at 12:33 AM
posted_image
<br>
posted_image

-------------





Posted By: highsierra
Date Posted: October 22, 2010 at 8:53 AM
have a larger image?

-------------
Brian Depew
High Sierra Window Tint




Posted By: Elizstoy
Date Posted: October 23, 2010 at 2:22 AM
posted_image

-------------





Posted By: highsierra
Date Posted: October 23, 2010 at 9:52 AM
thanks, how many inputs are there?
3 maybe? for sub amp, mids and highs?

-------------
Brian Depew
High Sierra Window Tint




Posted By: i am an idiot
Date Posted: October 23, 2010 at 5:25 PM
I am betting that there is one input, and 3 outputs, Front Rear and Subwoofer.




Posted By: Elizstoy
Date Posted: November 06, 2010 at 9:44 PM
Correct one input three outputs subwoofer, front and rear.

-------------





Posted By: haemphyst
Date Posted: November 07, 2010 at 9:38 AM
Inputs or outputs are not what the OP is interested in...

Now... I can't see what wires go to which pins exactly, but the WIRING for that would be:

1: Yellow - Battery constant
2: Black - chassis ground
3: Blue/white - accessory or deck remote +12V

Looks like a proprietary harness connector anyway. It's a 5-pin Molex. I bet he's on the phone Monday to JVC ordering one.




Posted By: Elizstoy
Date Posted: November 08, 2010 at 12:48 AM
Haemphyst thank you for the reply. Found the harness at JVC's website
CONNECTOR CORD QAM0013-003 for $9.95 i also need the TRIM PLATE
FSJD2019-002 for $5.11 and MOUNTING SLEEVE FSKM2004-001 for $5.86. But since i only paid $20 for it guess it wont be to bad. I figuered out the wiring the first top left is the 12v constant top right is the remote turn on. The bottom 3 first on the left is the negative connection the bottom middle and bottom right i have no clue. But it turned on. So again Thanks for your time and help.



-------------





Posted By: haemphyst
Date Posted: November 09, 2010 at 12:03 AM
Just because there are pins, it doesn't mean there's an electrical connection.

That unit is an RCA level unit only, so there will be no hi-level inputs.

The remaining two pins are not used, most likely, and since I only see three wires in the harness in the provided pic, I am going to assume there is nothing missing, connection-wise.





Print Page | Close Window