how are these required to be wired

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124037
Printed Date: May 10, 2024 at 12:13 PM

Topic: how are these required to be wired

Posted By: neek804
Subject: how are these required to be wired
Date Posted: October 20, 2010 at 11:31 PM

My Subs(i have 2)
https://www......com/item_8333_Pioneer+TS-W257D4.html

My Amp
https://www......com/item_8518_Alpine+MRP-M850.html

Replies:

Posted By: i am an idiot
Date Posted: October 21, 2010 at 3:02 AM

Option 2 (series/parallel) = 4 ohm load
Voice coils wired in series, speakers wired in parallel
Recommended Amplifier: Stable at 4, 2, or 1 ohm mono

Posted By: neek804
Date Posted: October 21, 2010 at 9:37 AM

Subs cut off when volume is turned up on HU and all amp settings are low

Posted By: i am an idiot
Date Posted: October 23, 2010 at 5:13 PM

Do you have a volt-ohm meter to first verify that you do have the speakers wired to a 4 ohm load? And secondly verify that the amp is getting 12 volts across the power and ground terminals of the amp, with the amp playing just below the level in which it shuts off.

Posted By: DYohn
Date Posted: October 23, 2010 at 5:24 PM

https://www.the12volt.com/installbay/forum_posts.asp~TID~85479~PN~1

-------------
Support the12volt.com

Print Page | Close Window