Print Page | Close Window

bx 12 remote control cable

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124137
Printed Date: May 13, 2025 at 10:36 PM


Topic: bx 12 remote control cable

Posted By: cachanilla
Subject: bx 12 remote control cable
Date Posted: October 26, 2010 at 5:34 PM

Does anybody know what type of cable uses the remote control of a Soundstream BX-12 bass processor? I tried one from a hifonics remote and it didn't work! Thanks.




Replies:

Posted By: mrm1776
Date Posted: October 27, 2010 at 8:24 AM
It's the standard telephone jack input, correct? Most bass-knobs are "specific" to the amps. Meaning that each telephone jack has 4 possible terminations inside of it, but they only use two. Different manufacturers terminate at different points inside of that jack. You will either need to get a Soundstream knob... or find out the correct pinning and re-terminate the connection on the end of the hifonics remote.

-------------
MECP Basic Installation Tech
Certification ID: CEA195600
Pioneer AVIC-X920BT
Polk Audio DXi 6500 - front
Rockford Fosgate Power T1693 - rear
Alpine MRP-F300
Alpine MRP-M500
Alpine SWR-1242D



Posted By: cachanilla
Date Posted: October 29, 2010 at 6:02 PM
Yes; I tried Soundstream support and they sent my email to the parts department but I haven't heard from them yet.


Print Page | Close Window