winisd parameter
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124249
Printed Date: April 23, 2024 at 9:11 PM
Topic: winisd parameter
Posted By: richmane
Subject: winisd parameter
Date Posted: November 02, 2010 at 1:43 PM
Here are my driver parameters:
Z: 4
Revc: 4
Levc: 1.62 mH
Sd: 0.0491 sq. m
BL: 15.8 T-m
Vas: 63.93 L
Mms: 129.1 g
Fs: 32 Hz
Qms: 12.11
Qes: 0.44
Qts: 0.42
Peak: 800W
Xmax: 8 mm
Displacement: 0.144 cf
Mount Depth: 135 mm
Voice Coil Diameter: 65 mm
I am unsure if I input the parameters on WinISD correctly, can someone plug these in so and let me know what you got to see if I got it right? I am a newb, sorry for all the neediness!
I have zeroes for Re and Le, not sure what to place there.
Thanks!
Replies:
Posted By: DYohn
Date Posted: November 02, 2010 at 1:55 PM
According to what you posted, Re = 4 and Le = 1.62. What problems are you having in WinISD? ------------- Support the12volt.com
Posted By: richmane
Date Posted: November 02, 2010 at 2:56 PM
none anymore thanks! actually, i input those parameters as a guess, and it fixed my curve, i'll let you know if i run in to any more problems, but i did post a port suggestion topic, if you wanna check it out, maybe some input, i'm trying to achieve rumbling bass, not booming, i built one box tuned to 60 hz, but i read that tuning it to start at 45 hz and end at 50-60 hz is typical. i don't know what slot port size should be, or if i do external.
thank you1
|