18 gauge speaker wire and alpine pdx ok?
Printed From: the12volt.comForum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124376
Printed Date: May 16, 2024 at 2:54 PM
Topic: 18 gauge speaker wire and alpine pdx ok?
Posted By: 2011boostdwrx
Subject: 18 gauge speaker wire and alpine pdx ok?
Date Posted: November 10, 2010 at 2:28 PM
I am in the process of installing my system into my 2011 WRX. I have installed many systems before and I am tired of tearing apart the door grommets and running wires. I am using a PDX 4.100 for my front CDT Braxial kit w.passive X-over. I want to use the Metra Quick Cable 18-gauge bundle wire to run from the amp back to the stock harness and use the stock wiring. IS this OK or will sound degrade dramatically? See Pic for bundle Quick Cable. will this cable not be good enough for the 75w x4 PDX?
Replies:
Posted By: 2011boostdwrx
Date Posted: November 10, 2010 at 2:31 PM
I can not get the picture of the Metra Quick cable to work
Posted By: i am an idiot
Date Posted: November 10, 2010 at 4:11 PM