Print Page | Close Window

ads al ch6 starter input wire?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124549
Printed Date: August 22, 2025 at 3:33 AM


Topic: ads al ch6 starter input wire?

Posted By: tianot
Subject: ads al ch6 starter input wire?
Date Posted: November 19, 2010 at 2:27 PM

hey guys, im installing a compustar r/s (cm4200) for 2004 dodge caravan, do i need to connect the starter input wire of the module into r/s unit if i use a d2d connection? if yes, how?

i got my vehicle diagram at bulldog security website, my question is do i need to wire the starter 2 output wire of the vehicle using a relay? 

thanks



-------------
tianot



Replies:

Posted By: Velocity Motors
Date Posted: November 21, 2010 at 4:12 PM
You can directly connect the YELLOW wire from the CM4200 and the BLACK/ WHITE wire from the module to the starter wire on the ignition switch.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window