2000 chevy suburban

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124636
Printed Date: April 30, 2024 at 2:06 AM

Topic: 2000 chevy suburban

Posted By: start25
Subject: 2000 chevy suburban
Date Posted: November 24, 2010 at 1:57 AM

On 2000 Chevy Suburban, hooked up aftermarket cd player, no sound through any speaker... Tryed hooking up directly to the speaker, works... sound coming out the speaker... Is there maybe factory amp wire that I need to hook up, or what? where would the amp be located if I have one? Maybe its fryed.... Please help...

Thank you!

Replies:

Posted By: i am an idiot
Date Posted: November 24, 2010 at 5:25 AM

There is possiby a factory amp. It is located behind the glove compartment. If the stock radio had sound, the amp should be fine. It should be as simple as turning the factory amp on. My installers tell me that some of them have to be bypassed. I think it is just that they want the extra 25 dollars labor. Somebody here may be abe to tell us what color the amp turn on wire is.

Posted By: soundnsecurity
Date Posted: November 24, 2010 at 3:56 PM

if there is an amp turn on wire it is probably pink on the factory radio plug.

-------------

Posted By: zerepdivad
Date Posted: November 29, 2010 at 9:49 PM

little thin harness that you're not using. it will be either a pink or green wire.

-------------
A DMM is a beautiful thing.

MECP Advanced Installer Certified.

Print Page | Close Window