replacing the mid from my components
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124687
Printed Date: May 28, 2024 at 11:23 PM
Topic: replacing the mid from my components
Posted By: souljah972
Subject: replacing the mid from my components
Date Posted: November 27, 2010 at 1:49 PM
I have a set of JL Audio C2's components im using for my front stage with a JL 300/4 but i blew a mid , I was wondering if i could replace the mid range woofers with some D series 2 way pioneer's cause they are all i have right now rather then buy a new set of C2's. They sound really good alone would hooking them up to the jl crossover cancel the pioneers tweeter out?
-------------
Live For The Music
Replies:
Posted By: haemphyst
Date Posted: November 27, 2010 at 2:12 PM
It may or may not work... Seriously.
It will FUNCTION, guaranteed, but if the impedance curve of the mid is not very close in character to the blown driver, your results will certainly not be optimal.
If you are going to replace, I very highly suggest replacing both of the original woofers (not just one...), and I think your overall results will be much more acceptable.
|