clarion nx 500
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124884
Printed Date: April 29, 2024 at 4:52 AM
Topic: clarion nx 500
Posted By: pitoaudiovisual
Subject: clarion nx 500
Date Posted: December 07, 2010 at 6:57 PM
I installed a Clarion NX500 and im trying to figure out a switch to work the DVD so i can drive and have the DVD playing. I put a regular toggle switch but the customer doesnt like it cause sometimes he has to toggle it a few times to make it work and he just wants to toggle it once to work. Any suggestions. Thanks in advance.
-------------
Confidence is the key to any project!!
Replies:
Posted By: agraves1
Date Posted: December 07, 2010 at 8:38 PM
Maybe a couple relays?
Posted By: pitoaudiovisual
Date Posted: December 07, 2010 at 8:45 PM
how would i set that up connect like 2 or 3 relays to the switch.
-------------
Confidence is the key to any project!!
Posted By: agraves1
Date Posted: December 07, 2010 at 9:14 PM
No you should able to just use them without the switch. Do you have to double pulse or triple pulse for the video to work?
If it was just one pulse you could ground 30 and 85, connect the remote turn on to 86, and then the parking brake to 87. I am trying to think to add more pulses.
Posted By: pitoaudiovisual
Date Posted: December 08, 2010 at 10:41 AM
it may need more pulses cause i have to flip the switch a few times to make it work. He doesnt want to use the parking brake cause he wants to be able to drive with the dvd playing
-------------
Confidence is the key to any project!!
|