stock separate wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124921
Printed Date: April 29, 2024 at 9:04 AM

Topic: stock separate wiring

Posted By: Jmirage
Subject: stock separate wiring
Date Posted: December 08, 2010 at 11:14 PM

I am wanting to wire for new components in my 06 honda accord hybrid.

Stock, they have 6.5 in the door and tweets on the dash.

Most cars I have had, I am able to tap into the factory wiring behind the dash, but I don't know how this works on this car.

How does the wiring go? Does it just split somewhere, and if so, how can I figure out where to tap into it? I don't think I can run new wiring, the door moldex plug is intimidating, unless there is an easy how-to somewhere to follow.

Can I can use the stock wiring to to the door speakers and run new ones to the tweets? How hard is running new wiring into a door?

Thanks!

-------------
God made turbo lag to give V-8s a chance

Replies:

Posted By: calijtee1
Date Posted: December 29, 2010 at 12:27 AM

theres a really good edu on how to do wiring thru molex plugs here on this site check it out

-------------
installers do it best. we got the magic hands!

Posted By: z03mz03m
Date Posted: December 29, 2010 at 9:43 PM

Here it is.

I did it the this way (the right way) on my car and am happy with the results. I will warn you the rubber boots can be...frustrating. lol

-------------
Dodge Magnum in progress:
Pioneer DEH-80PRS - PPI Amps - Dayton Subwoofer(s) - Exodus Anarchy's - Vifa Tweeters - Kinetik Battery