wiring jbl p26t tweeter with no amp
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125496
Printed Date: May 14, 2025 at 4:42 AM
Topic: wiring jbl p26t tweeter with no amp
Posted By: shadow818
Subject: wiring jbl p26t tweeter with no amp
Date Posted: January 06, 2011 at 10:57 AM
Im looking to install some jbl p26t tweeter to my speakers the tweeters come with crossovers do i need anything else to install them besides the crossovers they come with let me know thanks
Replies:
Posted By: i am an idiot
Date Posted: January 06, 2011 at 9:50 PM
The crossover and a working set of speaker wires off of your radio is all you need to enjoy your tweeters.
Posted By: shadow818
Date Posted: January 06, 2011 at 11:52 PM
So just wire them from the wire from the stereo even if the speakers have connections for tweeters just want to make sure thanks for the help
Posted By: i am an idiot
Date Posted: January 06, 2011 at 11:57 PM
If there is a crossover included with the tweeters, then yes you should connect the crossover input connection to the speaker wires at the point that they connect to the other speaker. If you did connect your tweeter to the tweeter connection of the speaker, the additional load of the new tweeters will change the characteristics of the other tweeters crossover.
|