apx4361 going into trouble

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125753
Printed Date: May 20, 2024 at 10:18 PM

Topic: apx4361 going into trouble

Posted By: simmocuz
Subject: apx4361 going into trouble
Date Posted: January 20, 2011 at 1:09 AM

I have a APX4361 4 channel amp it keeps going into protect mode and flashing blue once break then 3 flashes break then repeat.
It has been happening quite frequently lately and
more so when the volume is turned up higher what does this problem appear to be?

Cheers

Replies:

Posted By: 66sportfury
Date Posted: January 20, 2011 at 1:38 AM

apx audiopipe?

dont know alot about them. whats the rms power rating, what are you pushing with it, ohm load and size of power/ground wire you have.

-------------
ac delco am radio and sparkomatic 40 watt sound exploder

Posted By: simmocuz
Date Posted: January 20, 2011 at 3:26 AM

sorry should of said it's a Clarion APX4361 it's a 4 chan amp
680W peak 90W X 4 at 4Ohm
Pushing Clarion splits that are 75W RMS out of the front
I don't have the rears connected at the moment
I'v got 4 gauge power and earth and the earth is well earth to the chassy
here is a link to it on clarions website.
https://www.clarion.com/au/en/products/2009/audio/amplifier/APX4361/au-en-product-pf_1172420599471.html

Print Page | Close Window