jl cleansweep users?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125942
Printed Date: July 03, 2025 at 9:00 AM

Topic: jl cleansweep users?

Posted By: black318i
Subject: jl cleansweep users?
Date Posted: January 30, 2011 at 5:19 PM

Does it power on if the volume/aux switch isn't plugged in? I confirmed all power, ground and audio inputs are fine. I only have one volume control and I think it has had issues from day one. I had my cleansweep installed for over two years and now it won't power on anymore. I swapped in another cleansweep and it won't power on either. If anyone can test this and let me know I'd appreciate it.

Replies:

Posted By: i am an idiot
Date Posted: January 30, 2011 at 6:35 PM

Have you used a volt meter to make sure the unit is getting Power Ground and Remote power?

Posted By: ogjlbh21
Date Posted: February 01, 2011 at 10:18 PM

from my experience the cleansweep still works without the knob plugged in. i would check the signal sense switch on the cleansweep. also, if you have the ssi hooked up as well make sure the signal sense switches are set right.

Print Page | Close Window