no sound alpine iva d106 with imprint
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125975
Printed Date: July 05, 2025 at 5:02 PM
Topic: no sound alpine iva d106 with imprint
Posted By: etronicbmw
Subject: no sound alpine iva d106 with imprint
Date Posted: February 01, 2011 at 8:39 PM
No audio when switching from tuner to cd/dvd or ipod yes my car has a built in amp but is disconnected, i have a 4ch kenwood excelon installed, all new wires running from front to rear 4ch controlling my highs. cant figure this out any help would be greatful!!
Replies:
Posted By: i am an idiot
Date Posted: February 01, 2011 at 9:18 PM
Is there a rectangular cut out in the bottom cover of the alpine unit? Is the white switch under the cut out set to norm, or eq/div?
Posted By: etronicbmw
Date Posted: February 01, 2011 at 9:22 PM
set to eq/div
right/right
Posted By: i am an idiot
Date Posted: February 01, 2011 at 9:25 PM
Have you switched it to normal for troubleshooting purposes?
Posted By: etronicbmw
Date Posted: February 01, 2011 at 9:39 PM
Posted By: i am an idiot
Date Posted: February 02, 2011 at 11:46 AM
What is new to the system? Try removing the processor from the equation. Do you have sound with only the deck connected?
Posted By: etronicbmw
Date Posted: February 02, 2011 at 3:42 PM
new installation, set to norm still same problem, without imprint hooked up same problem. I cant seem to figure this out and this by far is not my first rodeo.
Posted By: i am an idiot
Date Posted: February 02, 2011 at 6:05 PM
Do you have a set of powered computer speakers you can use to check and see if you have signal getting to the amp?
Have you used a meter to verify that there is a connection between the amp and the speakers? Or a battery to pop them?
Posted By: etronicbmw
Date Posted: February 02, 2011 at 6:16 PM
but i have sound when the radio is on only so i know there is a connnection between the rca's and the speakers.
Posted By: etronicbmw
Date Posted: February 02, 2011 at 6:19 PM
when listening to the radio (Tuner) i have audio but when switched to ipod or cd no sound ive checked to see if amp is powered down with ipod or cd it still has power just no sound.
Posted By: i am an idiot
Date Posted: February 02, 2011 at 10:15 PM
There are 2 blue wires on the back of your radio. One of them has a white stripe, the other does not. You connected the solid blue wire. You should have used the Blue/White one. So whatever wire from the the vehicle or the system is connected to the blue wire, connect that wire(s) to the blue/white wire instead.
Posted By: etronicbmw
Date Posted: February 03, 2011 at 10:25 AM
I have the blue wire(solid blue) hooked up to my power ant I have the blue/white hooked up to my remote line in on my kenwood excelon amplifier
Posted By: etronicbmw
Date Posted: February 03, 2011 at 10:26 AM
Like I said before my amplifier still has power when selected to any other source other than radio (tuner)
Posted By: etronicbmw
Date Posted: February 07, 2011 at 5:16 PM
All set found the glitch. Thanks for your input!
|