Print Page | Close Window

amp for cvrs, setup advice

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126388
Printed Date: May 15, 2024 at 1:38 AM


Topic: amp for cvrs, setup advice

Posted By: bwolf25
Subject: amp for cvrs, setup advice
Date Posted: March 02, 2011 at 12:00 AM

i have 2 15' kicker cvrs,dvc 4-ohm 500 rms a piece, i currently have a kicker zx400(400rms) monoblock ruuning at 1-ohm...would the zx1000(1000rms) fit my subs perfectly if i ran it at 1-ohm also?



Replies:

Posted By: bwolf25
Date Posted: March 02, 2011 at 12:18 AM
so i have to 15' cvrs in a sealed box in a 97 ford thunderbird.....i was wondering if i cut out the trunk cover where the back window meets and towards the backseat, if it would make my system louder...kinda like a hatchback or suv....i want to try it but i dont want it to sound worse. any tips would help




Posted By: bwolf25
Date Posted: March 03, 2011 at 11:58 PM
say i have a mono block running at 1 or 2 ohms 1000rms and 2 dvc 4ohm subs. am i correct that the power would be split 2 ways because of 2 subs? so 500 rms a sub? or would it be 1000rms a sub?
stupid question i know





Print Page | Close Window