How Are Prestige Amps?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12639
Printed Date: June 11, 2024 at 2:28 AM
Topic: How Are Prestige Amps?
Posted By: carguy411
Subject: How Are Prestige Amps?
Date Posted: April 23, 2003 at 4:26 PM
any og you guys ever use these amps?are they any good im looking at the 1000watt class d amp thats stable to 1 ohm?it was this or a JBL bp120.1.what you thik or any other suggestions to power 2 10"audiobahns in to 1 ohm?thanks heres the specs on the prestige amp:
1000 WATT CLASS D MOSFET AMP MODEL 1 Ohm STAB
1000 Watt Mono-Block Subwoofer Only Class D Amplifier
Class D Subwoofer Only Mono Block Amplifier with Remote
Low Pass Filter, Variable from 30 Hz to 250 Hz
High Pass Subsonic Filter, Variable From 20 Hz to 50 Hz
RCA Line Level Output
Remote Sub-Bass Level Control (Under Dash Mount)
+12dB Bass Boost at 45 Hz or +18dB Bass Boost at 60 Hz
Thermal, Overload, DC Offset, Reverse Polarity and Short Circuit Protection
1 OHM STABLE
Replies:
Posted By: Big Purds
Date Posted: April 25, 2003 at 3:48 AM
Prestige amps are garbage...below entry level crap that people make big claims about that are totally unfounded...
go for the JBL BP 1200.1, it is a far better choice...bang for buck the BP1200.1 is a champ...very reliable and will do the power it claims...at 2 ohm OR 1 ohm...very diverse amp and shouldnt be mentioned in the same sentence as that crap Prestige amp...
Posted By: QuinnX1
Date Posted: April 25, 2003 at 9:30 AM
Big Purds hit it right on the head. Those damn amps get hot to the touch too. When you push them hard they will fry! 4sure!
|