cadence zrs c65, 2 dvc 12’s at 2 ohm

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126452
Printed Date: May 13, 2025 at 12:10 PM

Topic: cadence zrs c65, 2 dvc 12’s at 2 ohm

Posted By: mackrossi
Subject: cadence zrs c65, 2 dvc 12’s at 2 ohm
Date Posted: March 06, 2011 at 1:18 AM

I am completely unsure if the typical series / parallel wiring can be used with this amp. I've never come across 2 outputs on a mono block and I am more than a little confused.

Anybody with some insights to share?

Thanks!

Replies:

Posted By: mackrossi
Date Posted: March 06, 2011 at 2:37 AM

I am thrown off by its 'two' outputs being wired in parallel internally.

Posted By: mackrossi
Date Posted: March 06, 2011 at 6:19 AM

posted_image Sorted. It's a single output with two, internally linked, parallel termination blocks. It works fine. If you knew the kind of year it's been, this simple moment of uncertainty turned monster of doubt, would seem normal.

Thanks for all the information, and community involvement, that is the12volt.

Print Page | Close Window