subwoofer lead wire broken?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126459
Printed Date: May 13, 2025 at 12:47 AM

Topic: subwoofer lead wire broken?

Posted By: atrueog
Subject: subwoofer lead wire broken?
Date Posted: March 06, 2011 at 12:45 PM

i got 2 kicker cvrs and one of the lead wires snapped on the side of the cone. on my other sub it snapped but on the side thts soldered. anyone know how to fix this??

-------------
if you always do what you've always done you will always get what you've always got

Replies:

Posted By: 201.034
Date Posted: March 06, 2011 at 5:17 PM

Epoxy might work?

Posted By: i am an idiot
Date Posted: March 06, 2011 at 6:26 PM

The end that is broken at the terminal may be repairable. The one broke at the cone is not so easy to repair. Epoxy or SuperGlue will not work. You must extend the wire and use solder to do so. You can not solder at the cone.

Posted By: Edicius
Date Posted: March 10, 2011 at 11:19 PM

Would soldering affect the impedance?

Posted By: i am an idiot
Date Posted: March 11, 2011 at 3:00 AM

Print Page | Close Window